• Purity

  >95%, by SDS-PAGE under reducing conditions and visualized by silver stain

• Endotoxin Level

  <1.0 EU per 1 μg of the protein by the LAL method.  

• Activity

  Measured by its ability to transfer sulfate from PAPS to heparan sulfate. The specific activity is >40 pmol/min/μg, as measured under the described conditions. See Activity Assay Protocol on .

• Source

  Chinese Hamster Ovary cell line, CHO-derived Pro28-Trp470, with an N-terminal 6-His tag

• Accession #

• N-terminal Sequence    
  Analysis

  His

• Predicted Molecular Mass

  53 kDa

• SDS-PAGE

  70-90 kDa, reducing conditions

Assay Procedure

Materials

• Universal Sulfotransferase Activity Kit (Catalog # )

• 10X Assay Buffer (supplied in kit): 500 mM Tris, 150 mM MgCl₂, pH 7.5

• Recombinant Mouse Heparan Sulfate 6-O-Sulfotransferase 3/HS6ST3 (rhHS6ST3) (Catalog # 5406-ST)

• Donor Substrate: PAP³²S (3'-Phosphoadenosine-5'-Phosphosulfate) (Catalog # )

• Acceptor Substrate: Heparan Sulfate (Celsus Labs, Catalog # HO3105), 50 mg/mL stock in deionized water

• 96-well Clear Plate (Catalog # )

• Plate Reader (Model: SpectraMax Plus by Molecular Devices) or equivalent

1. Prepare 1X Assay Buffer by combining 10X stock and diluting 10 fold with deionized water.

2. Dilute 1 mM Phosphate Standard by adding 40 μL of the 1 mM Phosphate Standard to 360 μL of 1X Assay Buffer for a 100 μM stock. This is the first point of the standard curve.

3. Continue standard curve by performing six one-half serial dilutions of the 100 μM Phosphate stock in 1X Assay Buffer. The standard curve has a range of 0.078 to 5 nmol per well.

4. Load 50 μL of each dilution of the standard curve into a plate. Include a curve blank containing 50 μL of 1X Assay Buffer.

5. Prepare a reaction mixture containing 0.4 mM PAP³²S and 6 mg/mL Heparan Sulfate in 1X Assay Buffer.

6. Dilute Coupling Phosphatase 3 (supplied in kit) to 50 μg/mL in 1X Assay Buffer.

7. Dilute rmHS6ST3 to 33.34 μg/mL in 1X Assay Buffer.

8. Load 15 μL of the 33.34 μg/mL rmHS6ST3 into empty wells of the same plate as the curve. Include a control containing 15 μL of Assay Buffer.

9. Add 10 μL of 50 μg/mL Coupling Phosphatase 3 to wells containing enzyme and control, excluding the standard curve.

10. Add 25 μL of reaction mixture to the wells, excluding the standard curve.

11. Seal plate and incubate at 37 oC for 20 minutes.

12. Add 30 μL of the Malachite Green Reagent A to all wells. Mix briefly.

13. Add 100 μL of deionized water to all wells. Mix briefly.

14. Add 30 μL of the Malachite Green Reagent B to all wells.  Mix and incubate for 20 minutes at room temperature.

15. Read plate at 620 nm (absorbance) in endpoint mode.

16. Calculate specific activity:

     *Derived from the phosphate standard curve using linear or 4-parameter fitting and adjusted for Control.

Per Reaction:

• rmHS6ST3: 0.5 μg

• Coupling Phosphatase 3: 0.5 μg

• Heparan Sulfate: 150 ug

• PAP³²S: 0.2 mM

Background: Heparan Sulfate 6-O-Sulfotransferase 3/HS6ST3

Heparan sulfate is a highly sulfated polysaccharide that can be found on the cell surface and extracellular matrix. It is usually covalently attached to a protein core as the glycan component of a proteoglycan. Heparan sulfate interacts with a variety of proteins, such as growth factors, protease inhibitors, cytokines, lipoprotein lipase and viral envelope proteins, therefore playing roles in cell growth, cell differentiation, cell motility, blood coagulation, lipid metabolism and viral infection (1, 2). Heparan sulfate consists of repeating residues of uronic acid and N-acetylglucosamine. The uronic acid residues can be sulfated at the 2?O position by heparan sulfate 2?O? sulfotransferase. The N-acetylglucosamine residues can be sulfated at N-, 3?O, and 6-O positions by N-deacetylase/N-sulfotransferases, heparan sulfate 3-O- and 6-O-sulfotransferases, respectively. However, the reactions catalyzed by these sulfotransferases are normally incomplete on the whole chain of heparan sulfate. As a result, heparan sulfate displays enormous sequence diversity that allows it to interact with a wide spectrum of proteins differently. Three heparan sulfate 6-O-sulfotransferases are found both in human and mouse possibly with overlapping substrate specificity (3). HS6ST3 is ubiquitously expressed while HS6ST1 and HS6ST2 are expressed primarily in the liver and brain/spleen, respectively. Mouse HS6ST3 has 94% amino acid sequence identity with the human ortholog.The activity of the recombinant HS6ST3 has been measured with a phosphatase-coupled sulfotransferase assay (4).

• References:

1. Bernfield, M. et al. (1999) Annu. Rev. Biochem. 68:729.

2. Esko, J. D. and Selleck, S. B. (2002) Annu. Rev. Biochem. 71:435.

3. Habuchi, H. et al. (2000) J. Biol. Chem. 275:2859.

4. Prather, B. et al. (2012) Anal. Biochem. 423:86.

• Entrez Gene IDs:

  266722 (Human); 50787 (Mouse)

• Alternate Names:

  DKFZp761K2315; heparan sulfate 6-O-sulfotransferase 3; HS6ST3